TF Radio MP3 USB Decoder Board JRHT-Q9A 747D Unboxed

Advertisement

Product details of DC 5V Micro USB Power Supply TF Radio MP3 Decoder Board 5V Audio Module
747D JRHT-Q9A MP3 DECODER
FEATURES
Playing music in USB flash drive/ FM/TF memory card, infrared remote control, external audio input, USB charging.

1.5 "LCD DISPLAY WITH AUDIO LEVEL
Working voltage: dc 5v,
Working current: 1500mA,
Usb output voltage: dc 5 V +/- 5%,
Usb output current: 1000mA,
Decoding formats: mp3,
Storage support: usb disk, tf card, tf card supports up to 16 GB,
Impedance: 32ohm,
Aux input level: 650mv,
Fm frequency range: 87.5 ~ 108 MHz,
Output power: 2x3 w / 4ohm horn,
Input  : 1 x USB 2.0 SLOT, 1 x tf card slot, 1x3.5mm aux jack

LET UNBOXED THESE JRHT-Q9A 747D TF Radio MP3 USB Decoder Board




Actual Unboxed Packing list
  • 1 x mp3 player module
  • 1 x remote control (built-in 1 x CR1220) battery
  • 2 x connector wire (2pinRed and 4pin white)
  • 2 x round screw cover only
  • there is no instruction manual and Screw
  • Model Printed found is 747D JRHT-Q9A MP3 DECODER
This stuff has no instruction manual but I can share basic instruction how to put it.

Front PCB Board

Back PCB board

Connector wire (2pinRed and 4pin white)

The color red wires from (4pin white connector) is for Antenna input, you should connect it to antenna aluminum metal antenna.
The outL/outR is for input of power amplifier and (GND) symbol is negative DC supply

The (2pin red connector) is the power supply which is DC5V note that no circuit protection please check the polarity before connecting to the Power.

Built-In Integrated Circuit

  • BCGDX04.1 - main processor
  • RTC6218 - 8pin
  • ATHYC542 -8pin



Actual power-up test screenshot of TF Radio MP3 USB Decoder Board JRHT-Q9A 747D

USB Flash drive playing Mp3


FM station


Pros and cons

Fm station receiver needs to connect to a good antenna to make a clear sound without static.
Fm station save up to 100 station
The remote control can receive 5 meters away
The Mp3 sounds save last track even when repower on
It has an equalizer 5 band in remote accurately
All is works perfectly and plug and play to the amplifier
Bluetooth works as 3 meters, if far, some delay and cut off in sounds
In here where I buy this stuff which is plug and play


Advertisement

Comments

Unknown said…
is there a 747d device which does not require an amplifier
Phoenixemer said…
NO,Its a DIY decoder board have an output signal only and put to amplifier

Popular posts from this blog

4 FLASH DRIVE Flash Tools │FIRSTCHIP │ CHIPSBANK │ ALCOR │ SMI

How to Know │ Fix Fake capacity MiroSD│USB Drive format tools.

Portable Speaker Amplifier Audio Chip List │Schematic │Datasheet │Board │PDF